Updated Nov 22, 2026· 14 min read

Our Top Picks

  1. GMWD Hip Thrust Machine71 x 30.98 x 22 inches
    Check on Amazon
  2. BootySprout Hip Thrust Machine for High Resistance Glute29 x 25 x 7 inches32.9 pounds
    Check on Amazon
  3. Lifepro GluteBlast Hip Thrust MachineMedium50.59 x 19.68 x 17.72 inches36.8 pounds
    Check on Amazon
  4. Signature Fitness Glute Bridge Plate-Loaded Hip Thrust Machine
    Check on Amazon
  5. HANDBODE Hip Thrust Bench
    Check on Amazon

A dedicated hip thrust machine takes the awkward part of the lift out of the equation. Instead of rolling a barbell over your legs, finding a bench at the right height, and hoping the bar stays put, you step into a frame that holds the load, supports your back, and lets you drive through your heels with a repeatable range of motion. For a home gym, that consistency matters: the same setup every session, the same pad position, and a clear path to add load over time.

Our top pick: GMWD Hip Thrust Machine. Runner-up: BootySprout Hip Thrust Machine.

The five machines below cover the main ways to do the lift at home. Two are plate-loaded stations built around a pivoting carriage, one uses resistance bands on a folding frame, one is a foldable bench that doubles as a sissy squat station, and one is a heavy padded box that works with a barbell you already own. Every pick is a standalone machine or bench, not a barbell pad and not a band-only glute bridge setup, and every model name and code was confirmed against published product information.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

Quick Answer

For heavy loading, the GMWD HRTQ is the strongest station here, rated to 800 lb with a full-length back pad and a safety limiter. For a small space, the BootySprout folds flat and runs on bands, while the Lifepro GluteBlast folds away on wheels. The Signature Fitness Glute Bridge is the budget plate-loaded pick, and the HANDBODE bench suits lifters who already own a barbell and plates.

GMWD Hip Thrust Machine

The GMWD HRTQ is the heavyweight of this lineup, a plate-loaded lying station built around a pivoting carriage and a long padded back support. It is the pick for lifters who want to load the movement the same way they load a squat or a deadlift, with plates on a holder and a frame that stays planted while the carriage moves. The published capacity is 800 lb, and the frame is 14-gauge steel with commercial-grade dual pivot bearings, so the moving parts are sized for serious load rather than light accessory work.

Setup is built around a full-length back pad that supports the spine through the whole range of motion, which is the main comfort advantage over a standard bench and barbell. Two grip handles sit on each side of the shoulder pad frame, and a safety limiter stops the carriage at a set point, so a failed rep ends against a stop rather than against your hips. The footboard adjusts to three positions, and the weight holder takes up to 500 lb, with 250 lb on each side, which covers most home lifters with room to spare.

Footprint is the trade-off. The frame measures 71 inches long, about 31 inches wide, and 22 inches high, and the package weight is 190 lb, so this is a permanent fixture rather than something you move between sessions. The maker lists a gross weight of 192 lb in one place and a package weight of 190 lb in another, so treat the figure as roughly 190 lb and plan the delivery accordingly. The frame carries a lifetime warranty and the parts carry a six-month warranty, which is worth noting because the parts term is short for a machine at this level.

One listing quirk deserves a mention. The product information lists a battery power source and an LCD display, which plainly do not apply to a manual plate-loaded machine, so ignore those two fields. The red colorway is the one confirmed here; a silver version of the same HRTQ frame sells under a separate code, so confirm the red code at checkout if that is the finish you want.

Specs

    Spec Detail
    ASIN B0CKR4HD3M
    Model HRTQ
    Type Plate-loaded lying hip thrust station
    Weight capacity 800 lb
    Weight holder capacity 500 lb (250 lb each side)
    Footboard Three-position adjustable
    Frame 14-gauge steel, dual pivot bearings
    Item dimensions 71 x 30.98 x 22 in
    Package weight 190 lb
    Safety features Safety limiter, grip handles on both sides
    Warranty Frame lifetime, parts 6 months
    Color Red

    BootySprout Hip Thrust Machine

    The BootySprout is the opposite end of the spectrum from the GMWD: a light band machine that folds flat and stores against a wall. It ships with three resistance bands rated at 45, 90, and 135 lb, and the maker lists a maximum weight recommendation of 400 lb, which covers the combined load of the bands plus bodyweight work. For lifters in an apartment or a shared room, the folding frame and the lack of plates are the whole point.

    The frame weighs somewhere between 26 and 33 lb depending on the source, with the maker guide listing 26 lb and a roundup listing 32.9 lb, so treat the figure as roughly 30 lb and expect a unit one person can carry and fold without help. When folded it measures about 25 by 30 by 7 inches, which fits under a bed or behind a door. The maker lists a height range of 4 feet 8 inches to 6 feet 5 inches, which is generous for a band machine and covers most lifters without adjustment.

    Band resistance feels different from plate loading, and buyers should understand the difference before ordering. Bands add the most tension at the top of the thrust, where the glutes are strongest, and the least at the bottom, which is a useful strength curve for this lift but not the same as a constant plate load. The three included bands let you step up in stages, and the machine is a dedicated hip thrust unit with no setup beyond unfolding it and clipping the bands in place.

    Stock is the main caveat. A maker guide checked in late October 2026 found the BootySprout sold out at that time, so confirm availability before ordering and do not assume the listing will stay in stock. The black colorway is the one confirmed here; a white version sells under a separate code, so confirm the black code at checkout.

    Specs

      Spec Detail
      ASIN B0C5Y4X7YN
      Type Band hip thrust machine, folding frame
      Included bands 45, 90, and 135 lb
      Maximum weight recommendation 400 lb
      Frame weight 26 lb per maker guide; 32.9 lb per roundup listing
      Folded dimensions About 25 x 30 x 7 in
      Height range 4 ft 8 in to 6 ft 5 in
      Color Black

      Lifepro GluteBlast Hip Thrust Machine

      The Lifepro GluteBlast is a foldable bench-style machine that covers hip thrusts, glute bridges, sissy squats, and kickbacks on one frame. It is the most versatile pick here, and the folding design with built-in wheels makes it the easiest to move and store. The published capacity is 220 lb, which is the lowest load rating in this lineup, so it suits moderate loading rather than heavy plate work.

      The frame folds for storage and rolls on built-in wheels, which matters in a small home gym where a dedicated station would eat floor space permanently. The maker lists a height range up to 6 feet 3 inches, and the unit weighs about 36.8 lb, so one person can fold it and wheel it to a corner after a session. The model number is LP-GLTBLST, and the machine ships with resistance bands, which add load without plates.

      Two things need a clear note. First, the 220 lb capacity is a hard ceiling for this frame, and lifters who already thrust well above that figure should look at the plate-loaded stations instead. Second, the published product information for this machine is thin: the maker publishes few specifications, so confirm the capacity, the folded dimensions, and the band setup on the listing before ordering. The GluteBlast Lite is a separate, lighter version of the same idea and is not the pick here, so confirm the standard GluteBlast model at checkout.

      Specs

        Spec Detail
        ASIN B0BSVJ9T76
        Model LP-GLTBLST
        Type Foldable hip thrust bench, multi-use
        Weight capacity 220 lb
        Frame weight About 36.8 lb
        Storage Folds flat, built-in wheels
        Height range Up to 6 ft 3 in
        Included Resistance bands
        Model year 2023

        Signature Fitness Glute Bridge Machine

        The Signature Fitness Glute Bridge is the straightforward budget plate-loaded pick: a pivoting carriage, a back pad, and a plate holder, with no folding mechanism and no extra stations attached. It loads with standard Olympic plates, starts at 15 lb of carriage resistance with no plates added, and carries a published maximum load of 360 lb, which works out to four 45 lb plates on each side. That is enough for most home lifters and keeps the footprint smaller than the GMWD.

        The frame is alloy steel with 3 mm wall thickness and commercial-grade dual pivot bearings, and the listing notes a bottom dropout safety stop, which catches the carriage if a rep fails at the bottom. Integrated band pegs let you add bands to change the resistance curve, which is a useful option for lifters who want extra tension at lockout without adding plates. Plates, bands, and collars are sold separately, so budget for those if you do not already own them.

        The main limitation is published detail. The listing gives a two-year manufacturer warranty and a model name of HipThrust-2G, but it does not publish a maximum user weight or an assembled footprint, and the package measures 57 by 27.5 by 10 inches at about 57.7 lb. Larger lifters should note one owner report that the machine feels snug above 270 lb of bodyweight, so taller or heavier lifters should measure the pad and frame against their own size before ordering. Assembly is also worth a mention: owner feedback describes the sled installation as fiddly, so set aside extra time and a second pair of hands for the first build.

        Specs

          Spec Detail
          ASIN B0BPNFWNPB
          Model HipThrust-2G
          Type Plate-loaded glute bridge machine
          Maximum load capacity 360 lb (four 45 lb plates each side)
          Starting resistance 15 lb (carriage only)
          Plate compatibility Olympic 2 in plates
          Frame Alloy steel, 3 mm wall thickness
          Safety features Bottom dropout safety stop, band pegs
          Package dimensions 57 x 27.5 x 10 in
          Package weight About 57.7 lb
          Warranty 2 year manufacturer
          Color Black

          HANDBODE Hip Thrust Bench

          The HANDBODE is the simplest pick in this lineup: a heavy padded bench that you pair with a barbell and plates you already own. There is no carriage, no plate holder, and no moving frame, which keeps the design simple and the footprint small. The large size measures 16 by 21 by 23 inches, weighs 40 lb, and carries a published weight capacity of 800 lb, which is the highest capacity among the bench-style picks here.

          The bench surface is a waterproof, non-slip 1000D mesh over high-density recycled cotton filling, and the base has a non-slip pad to keep the box planted during heavy sets. Beyond hip thrusts and glute bridges, the listing describes the same box for box jumps, push-ups, squats, and ab work, so it earns its floor space as a general training block rather than a single-purpose tool. That versatility is the main reason to choose a bench over a machine: one box, several exercises, no assembly beyond unboxing.

          Two listing details need care. First, the size chart is confusing, with several size options listed at different capacities, including smaller sizes rated at 120 lb and 330 lb, so confirm the large size at 16 by 21 by 23 inches and the 800 lb capacity at checkout. Second, a separate listing bundles the same bench with a 4 foot Olympic barbell under a different code, so if you want the barbell included, confirm that bundle code rather than assuming the bench-only listing includes it. The bench-only code confirmed here is the black and green colorway.

          Specs

            Spec Detail
            ASIN B0FPCXB48Y
            Type Hip thrust bench, multi-use training box
            Size (large) 16 x 21 x 23 in
            Product weight 40 lb
            Weight capacity 800 lb
            Surface Waterproof non-slip 1000D mesh
            Filling High-density recycled cotton
            Base Non-slip pad
            Uses Hip thrust, glute bridge, box jump, push-up, squat, ab work
            Color Black/Green

            How to Choose

            Start with the type of resistance you want. Plate-loaded stations like the GMWD and the Signature Fitness give you constant load through the whole range of motion and the clearest path to progressive overload, since you add plates in known increments. Band machines like the BootySprout change resistance through the rep, with more tension at lockout, which suits the strength curve of the hip thrust but makes small load jumps harder to track. A bench like the HANDBODE gives you the most freedom, since the barbell and plates set the load, but it also demands the most setup per session.

            Next, measure your floor space honestly. The GMWD needs a permanent spot about 71 inches long and 31 inches wide, plus room to load plates on both sides, while the BootySprout and the Lifepro fold away and the HANDBODE tucks against a wall. If the machine has to share a room with other uses, a folding frame or a bench is the practical choice, and a fixed station is only sensible when it can stay put.

            Check the capacity figures against your current numbers, and read them carefully. Some makers list a maximum load, some list a maximum user weight, and some list both, and the two figures are not the same. The GMWD lists an 800 lb load capacity, the Signature Fitness lists 360 lb, the Lifepro lists a 220 lb capacity, and the BootySprout lists a 400 lb maximum weight recommendation, so compare like with like and leave headroom for the loads you expect to reach in a year. Also confirm the pad height against your own height: a back pad that sits too low or too high changes the leverage of the lift and can make lockout uncomfortable.

            Finally, confirm the exact code at checkout. Several machines here sell in more than one color or bundle, and the color or bundle variant carries its own code. The GMWD silver frame, the BootySprout white frame, and the HANDBODE barbell bundle are all separate listings, and ordering the wrong code means waiting on a return.

            Think about delivery and assembly before you order. A station that weighs close to 200 lb arrives in a large box and may need two people to move and build, while a folding bench arrives in one manageable carton. Check whether the maker includes tools and whether the assembly guide is clear, because a plate-loaded station has more parts than a bench, and a fiddly first build can eat an evening.

            Who Should Skip It

            Skip a dedicated hip thrust machine if you already thrust comfortably with a barbell and a bench and have no complaint about the setup. A barbell, a pad, and a bench you already own cost nothing extra and load just as heavy, so a machine only earns its place when the setup itself is the problem.

            Skip the heavy plate-loaded stations if your training space is shared or temporary. The GMWD weighs about 190 lb and needs a permanent footprint, and the Signature Fitness still needs floor space plus plate storage, so renters and lifters in multi-use rooms should look at the folding BootySprout, the folding Lifepro, or the HANDBODE bench instead.

            Skip the light band and bench options if you already thrust heavy. The Lifepro tops out at 220 lb, and the BootySprout runs on bands with a 400 lb maximum recommendation, so lifters who load well above those figures need a plate-loaded station. Also skip the whole category if you have a hip or lower back issue that flares under loaded hip extension, and talk to a clinician before adding a new loaded movement.

            Frequently Asked Questions

            Do I need a hip thrust machine, or is a barbell and bench enough?

            A barbell and bench are enough for most lifters, and they load just as heavy as any machine here. A machine earns its place when the barbell setup is the problem: rolling the bar into position, finding a bench at the right height, or keeping the bar stable through the set. If none of those bother you, spend the money on plates instead.

            What is the difference between a plate-loaded machine and a band machine?

            A plate-loaded machine uses weight plates on a carriage, so the load stays constant through the whole rep and increases in known steps. A band machine uses elastic bands, so resistance rises as you reach lockout and falls as you lower back down. Plates suit lifters who track small load increases, while bands suit lifters who want a portable setup and a strength curve that matches the lift.

            How much floor space does a hip thrust machine need?

            It depends on the type. The GMWD station measures about 71 by 31 inches and needs extra room on both sides for loading plates, so plan on a permanent spot of roughly 8 by 5 feet. The BootySprout folds to about 25 by 30 by 7 inches, the Lifepro folds and rolls away, and the HANDBODE bench measures 16 by 21 by 23 inches, so those three fit in a shared room.

            Can I use a hip thrust machine for other exercises?

            Yes, within limits. The Lifepro doubles as a sissy squat station and covers kickbacks, and the HANDBODE bench works for box jumps, push-ups, squats, and ab work. The plate-loaded stations are more focused: the GMWD and the Signature Fitness are built for hip thrusts and glute bridges, and using them for other movements is not their design.

            Conclusion

            The right hip thrust machine depends on how heavy you lift and how much space you can give up. The GMWD HRTQ is the strongest station here, with an 800 lb capacity, a full-length back pad, and a safety limiter, and it suits a dedicated home gym where it can stay put. The BootySprout folds flat and runs on bands for small spaces, the Lifepro GluteBlast folds and rolls away while doubling as a sissy squat bench, the Signature Fitness Glute Bridge is the straightforward plate-loaded budget pick, and the HANDBODE bench is the simplest option for lifters who already own a barbell and plates. Measure your space, check the capacity figures against your current numbers, and confirm the exact code at checkout before ordering.

            Product and ASIN Reference

            Product ASIN Value group
            GMWD Hip Thrust Machine B0CKR4HD3M premium
            BootySprout Hip Thrust Machine B0C5Y4X7YN mid-range
            Lifepro GluteBlast Hip Thrust Machine B0BSVJ9T76 mid-range
            Signature Fitness Glute Bridge Machine B0BPNFWNPB budget
            HANDBODE Hip Thrust Bench B0FPCXB48Y budget
            C
            Chris Parker
            We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

            FAQ

            Do I need a hip thrust machine, or is a barbell and bench enough?
            A barbell and bench are enough for most lifters, and they load just as heavy as any machine here. A machine earns its place when the barbell setup is the problem: rolling the bar into position, finding a bench at the right height, or keeping the bar stable through the set. If none of those bother you, spend the money on plates instead.
            What is the difference between a plate-loaded machine and a band machine?
            A plate-loaded machine uses weight plates on a carriage, so the load stays constant through the whole rep and increases in known steps. A band machine uses elastic bands, so resistance rises as you reach lockout and falls as you lower back down. Plates suit lifters who track small load increases, while bands suit lifters who want a portable setup and a strength curve that matches the lift.
            How much floor space does a hip thrust machine need?
            It depends on the type. The GMWD station measures about 71 by 31 inches and needs extra room on both sides for loading plates, so plan on a permanent spot of roughly 8 by 5 feet. The BootySprout folds to about 25 by 30 by 7 inches, the Lifepro folds and rolls away, and the HANDBODE bench measures 16 by 21 by 23 inches, so those three fit in a shared room.
            Can I use a hip thrust machine for other exercises?
            Yes, within limits. The Lifepro doubles as a sissy squat station and covers kickbacks, and the HANDBODE bench works for box jumps, push-ups, squats, and ab work. The plate-loaded stations are more focused: the GMWD and the Signature Fitness are built for hip thrusts and glute bridges, and using them for other movements is not their design.
            Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
            Best Hip Thrust Machines for Stronger Glutes and…Check price on Amazon

            More from Amazon

            Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

            Amazon Prime

            Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

            Start a Prime free trial
            Prime for Young Adults

            A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

            See Prime for Young Adults
            Audible

            Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

            Try Audible free
            Amazon Music Unlimited

            Ad-free music streaming. Eligible new subscribers can start with a free trial.

            Try Music Unlimited free

            As an Amazon Associate we earn from qualifying purchases.